Necuron K11

K11

Mixture-ratio A to B:
1 to 1
Pot life:
approx. 140 – 160 sec. at 25°C
Curing time:
approx 12 – 18 hours at 25°C
Technical data:
Colour: green (similar to NECURON® 1050 and 1150)
Mix viscosity: 80 – 100 mPas
Processing:
Ensure that the Part A is completely homogenised before processing begins. Make sure that the model boards are clean and free of dust, dirt and grease. For best results, it is recommended that the two components are at least 20°C before mixing. Mix the two parts thoroughly for approx. 15 - 30 sec. as per mixing ratio and apply by brush or spread on both parts to be bonded. Bring the faces together promptly. If necessary, clamp the boards together to ensure a perfect bond.
Subsequent machining:
The laminated board can generally be handled in 20-30 minutes at room temperature. The precise handling time will vary with temperature. Maintain temperature at a minimum 20 °C during cure.
Efficiency:
2 kg units (1 kg component A und 1 kg component B) for gluing approx. 6 – 7 boards
Shelf life:
approx. 6 months in well closed containers and a dry environment at a temperature of 20°C to 25°C - preferably in original packs
Delivery/packing unit:
1.0 kg component A
1.0 kg component B
data sheet (pdf format) for downloading
safety data sheet (pdf format) for downloading
(component A)
safety data sheet (pdf format) for downloading
(component B)
maviweb